Farmet FANTOM FX 850 PS Operating Manual
  1. Manuals
  2. Brands
  3. Farmet Manuals
  4. Tiller
  5. FANTOM FX 850 PS
  6. Operating manual

Farmet FANTOM FX 850 PS Operating Manual

Hide thumbs Also See for FANTOM FX 850 PS:
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATING MANUAL
FX 850 PS
Farmet a. s.
Jiřinková 276
552 03 Česká Skalice, CZ
FANTOM
Edition: 1 | effective from: 1. 7. 2020
telefon:
+420 491 450 111
fax:
+420 491 450 136
GSM:
+420 774 715 738
IČ:
46504931
web:
DIČ: CZ46504931
e-mail: farmet@farmet.cz
www.farmet.cz

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FANTOM FX 850 PS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Farmet FANTOM FX 850 PS

Summary of Contents for Farmet FANTOM FX 850 PS

  • Page 1 OPERATING MANUAL FANTOM FX 850 PS Edition: 1 | effective from: 1. 7. 2020 IČ: Farmet a. s. telefon: +420 491 450 111 46504931 web: www.farmet.cz Jiřinková 276 DIČ: CZ46504931 fax: +420 491 450 136 e-mail: farmet@farmet.cz 552 03 Česká Skalice, CZ...
  • Page 2 FANTOM 850 PS Dear customer, Semi-carried cultivators FANTOM are quality products of Farmet a.s. Ceska Skalice. You can fully utilise the advantages of your machine after thoroughly studying the operating manual. The serial number of the machine is punched on the production label and written in the operating manual (see Table 1).

  • Page 3: Table Of Contents

    Manual FANTOM 850 PS TABLE OF CONTENTS MACHINE LIMIT PARAMETERS ........................ 4 Technical parameters ......................... 4 Machine weight distribution during transport .................. 5 Safety statement ..........................5 A. GENERAL INSTRUCTIONS FOR USE ..................... 6 PROTECTIVE EQUIPMENT ........................6 B. MACHINE TRANSPORT USING TRANSPORT MEANS ................7 C.

  • Page 4: Machine Limit Parameters

    Transport of burdens on the machine structure, Aggregation of the machine with another towing equipment than stated in Chapter „3.1“.  TECHNICAL PARAMETERS Table 2 – Technical Parameter PARAMETERS FANTOM FX 850 PS Working width (mm) 8,550 Transport width (mm) 3,000 Transport height (mm)

  • Page 5: Machine Weight Distribution During Transport

    Manual FANTOM 850 PS MACHINE WEIGHT DISTRIBUTION DURING TRANSPORT 3 000 kg 6 000 kg SAFETY STATEMENT This warning sign warns about an immediate dangerous situation ending with death or severe injury. This warning sign warns about a dangerous situation ending with death or severe injury.

  • Page 6: General Instructions For Use

    Manual FANTOM 850 PS A. GENERAL INSTRUCTIONS FOR USE The machine is made in accordance with the latest equipment state and approved safety regulations. However, dangers of user or third person injury or machine damage or creation of other material damage may arise during use.

  • Page 7: Machine Transport Using Transport Means

    Manual FANTOM 850 PS MACHINE TRANSPORT USING TRANSPORT MEANS The transport means designed for machine transport must have the load capacity minimally identical with the weight of the transported machine. The total weight of the machine is stated on the production label.

  • Page 8: Machine Handling Using Lifting Equipment

    Manual FANTOM 850 PS MACHINE HANDLING USING LIFTING EQUIPMENT The lifting equipment and tying means designed for handling of the machine must have their load capacity at least identical with the weight of the handled machine. Machine fastening for handling may only be performed in places designed for that and marked with self- adhesive labels showing the "chain"...

  • Page 9: Work Safety Labels

    Manual FANTOM 850 PS D. WORK SAFETY LABELS Warning safety labels serve for operator protection. General: A) Strictly observe the warning safety labels. B) All safety instructions also apply to other users. C) Upon damage or destruction of the aforementioned "SAFETY LABEL" located on the machine, THE OPERATOR IS OBLIGED TO REPLACE IT WITH A NEW ONE!!! The position, appearance, and precise meaning of work safety labels on the machine is determined in the following tables (Tab.
  • Page 10 Manual FANTOM 850 PS The pressure vessel is under gas and P 42 H oil pressure. Execute disassembly and repairs only according to the instructions in the manual. Secure the machine against P 52 H unwanted movement by positioning on its working bodies. Stay outside the reach of the tractor P 53 H - agricultural machine set, if the...
  • Page 11 Manual FANTOM 850 PS Fig. 1 – Location of safety labels on the machine P20H P50H P39H P53H P20H P50H P13H P42H P101H P37H P39H P53H P53H P20H P37H P53H P100H P20H P20H P52H P52H P50H P37H P53H P20H P37H P53H 11 │...

  • Page 12: Description

    1. DESCRIPTION The FANTOM FX 850 PS machine is constructed as semi-carried. The basic version consists of a tractive pole with a TPS suspension bar with 36 mm or 60 mm pivots for the TPS 3 and KIROVEC category, or a loop for bottom hitch (51 mm, 71 mm or K80 hitch), a central frame with the transportation axle and four side frames.
  • Page 13 Manual FANTOM 850 PS DIAGRAM OF THE HYDRAULIC SYSTEM OF FX 850 PS: 13 │ 33...

  • Page 14: Machine Assembly At The Customer

    Manual FANTOM 850 PS 2. MACHINE ASSEMBLY AT THE CUSTOMER The operator must perform the assembly according to the instructions of the producer, best in  cooperation with the expert servicing technician determined by the producer.  The operator must secure a functional test of all assembled parts after the completion of the machine assembly.

  • Page 15: Aggregation To A Tractor

    Manual FANTOM 850 PS 3.1. AGGREGATION TO A TRACTOR The machine can be connected only to a tractor, whose curb weight is identical or higher than the overall  weight of the connected machine.  The machine operator must observe all generally valid regulations of work safety, health protection, fire safety, and environmental protection.

  • Page 16: Hydraulics Connection

    Manual FANTOM 850 PS 3.2. HYDRAULICS CONNECTION Connect the hydraulics only when the hydraulic circuits of the machine and the tractor (aggregate) are in  a pressure-less condition.  The hydraulic system is under high pressure. Regularly check for leaks and immediately remove obvious damage of all lines, hoses, and pipe unions.
  • Page 17 Manual FANTOM 850 PS Fig. 3 – Hydraulic Circuits RED DUSTERS – control of side frame folding and securing (after control valve switching)  1 TAPE: folding the side frames into the transport position securing the frames against unfolding  2 TAPES: unfolding the side frames into the working position side frame release...

  • Page 18: Hydraulics Control Panel

    Manual FANTOM 850 PS 3.3. HYDRAULICS CONTROL PANEL  On the tow bar, there is a control panel with up to 4 levers (according to machine equipment, the number of levers may vary).  By moving the levers, spherical valves in hydraulic circuits are switched or closed. ...
  • Page 19 Manual FANTOM 850 PS Roller circuit closing valve levers (green circuit) Right lever position The green circuit is open. The cylinder and tow bar piston rods may move. Used during work. Attention! Unexpected machine movement may occur upon switching. Upper lever right, lower lever left Upper lever –...
  • Page 20 Manual FANTOM 850 PS Left lever position The green circuit is closed. The roller and tow bar piston rods cannot move. Used during transport. Covering disc circuit function switching lever (white circuit) Right lever position The white circuit controls the covering discs. Left lever position The white circuit controls the support leg.
  • Page 21 Manual FANTOM 850 PS PRESSURE VESSEL Never open or adjust (welding, drilling etc.) the pressure vessel (pressure accumulator). The pressure vessel is still under gas pressure even after it has been emptied. Empty the pressure vessel in case of any work on the hydraulics of the machine. The manometer must not show any pressure, or the pressure on the manometer must decrease to 0 bars.

  • Page 22: Folding And Unfolding Of The Machine

    Manual FANTOM 850 PS 3.4. FOLDING AND UNFOLDING OF THE MACHINE  The hydraulics for the folding and unfolding must be connected to the double-action control unit. The operator must ensure that during folding and unfolding of the side frames, no person or animal is within ...

  • Page 23: Machine Unfolding Procedure

    Manual FANTOM 850 PS 3.4.1. MACHINE UNFOLDING PROCEDURE Tab. 5 – Work position of the machine Machine Unfolding Procedure – Work Position Initial condition: The machine is lifted on the axle (height up to 4 m), the side frames are secured with hooks, the spherical valves closed for transport, the switching valve is set to securing hooks.

  • Page 24: Machine Folding Procedure

    Manual FANTOM 850 PS 3.4.2. MACHINE FOLDING PROCEDURE Tab. 6 – Transport position of the machine Machine Folding Procedure – Transport Position Initial condition: The machine is unfolded and maximally lifted during the headland turn. All closing valves open, the red circuit switched to frame folding Lift the machine up to the maximum height using the green circuit.

  • Page 25: Machine Transport On Roads

    FANTOM 850 PS Warning!!! The machine must only be transported by the axle, not rollers. 4. MACHINE TRANSPORT ON ROADS Transport position of FANTOM FX 850 PS  Connect the machine by suspending on the tractor using the two-point suspension equipment. ...

  • Page 26: Machine Adjustment

    Manual FANTOM 850 PS 5. MACHINE ADJUSTMENT Working depth on the Prac.hloubka na válcích Fig. 7 – Machine adjustment rollers Working depth on the Working depth on tracing wheels Front tools Height of working discs 5.1. MACHINE WORKING DEPTH ADJUSTMENT ...

  • Page 27: Ajustment Of Depth On Rollers

    Manual FANTOM 850 PS  On all piston rods, the same washer combination must always be set according to the tables at the setting point!!!  Specified working depths at individual positions are only for information. They may vary according to particular soil conditions.

  • Page 28: Front Tools Depth Setting

    Manual FANTOM 850 PS 5.2. FRONT TOOLS DEPTH SETTING Attention! The front tools working depth changes with the working depth of the ploughshares.  The setting is hydraulic from the cabin using the blue hydraulic circuit.  The working depth can also be smoothly changed while driving. ...

  • Page 29: Levelling Disc Adjustment

    Manual FANTOM 850 PS 5.3. LEVELLING DISC ADJUSTMENT  Set the working depth of the directing discs using the hydraulic circuit (WHITE). Be careful when setting.  Correctly set discs ensure perfect levelling and covering with fine soil across the entire working width. ...

  • Page 30: Machine Maintenance And Repairs

    Manual FANTOM 850 PS 6. MACHINE MAINTENANCE AND REPAIRS Observe the safety instructions for treatment and maintenance.  If it is necessary to weld during the repair and have the machine connected to the tractor, it must have disconnected supply cables from the alternator and the accumulator. ...

  • Page 31: Machine Storage

    Manual FANTOM 850 PS 7. MACHINE STORAGE Long-term machine shutdown:  Store the machine under a roof if possible.  Store the machine on a flat and solid surface with sufficient load capacity.  Clean the machine before storing and conserve so that it is not damaged in any way during storage. Pay special attention to all marked lubrication points and properly lubricate them according to the lubrication plan.

  • Page 32: Environmental Protection

    This provision does not apply to the replacement of wearable spare parts (see point 11.2.3). 11.2.8 The warranty is conditioned by using the genuine spare parts of the manufacturer. Prepared by: Technical Department, Farmet a.s., Jirinkova 276, Ceska Skalice 552 03, On 18 August 2020, changes reserved. 32 │ 33...

  • Page 33: Ce Certificate Of Conformity

    CE CERTIFICATE OF CONFORMITY EG-KONFORMITÄTSERKLÄRUNG DÉCLARATION CE DE CONFORMITÉ СЕРТИФИКАТ СООТВЕТСТВИЯ ЕС DEKLARACJA ZGODNOŚCI WE Nous Мы Farmet a.s. Jiřinková 276 552 03 Česká Skalice Czech Republic DIČ: CZ46504931 Tel/Fax: 00420 491 450136 Vydáváme na vlastní zodpovědnost toto prohlášení. Hereby issue, on our responsibility, this Certificate.

Table of Contents