Table of Contents
Advertisement
Version 1.1
After selecting a language to use for the
2
phone, press the [>] soft button.
- When the phone is connected to the system
after easy installation, the language may be
changed depending on the administrator's
settings.
Set up the mode. Depending on the
3
selected setup method, the easy
installation step may vary.
- Server: Enter server address and phone
account information, and then select a system
type.
- PNP: If available, select PNP.
Enter the network information.
4
When the setup method is [Wired]
- Select one from DHCP/Static/PPPoE.
- Make sure to contact the system administrator
because the network connection may fail if
incorrect information is entered.
When the setup method is [Wireless]
- When Wi-Fi is selected, nearby APs are
automatically located.
- Wi-Fi functions correctly when the power
adapter is connected.
- After selecting an AP, connect to it in STATIC
or DHCP mode. (The Wi-Fi feature may not
be supported in some environments.)
November 2014
Page | 25
Advertisement
Table of Contents
