Sharp AR-C360P Software Configuration Manual page 32

2
2-32 Setting up Network Servers
2003 server, Windows workstations can still print to the Fiery. This
method of printing is called Windows, or SMB printing. In this type
of network environment, computers running Windows 98/Me and
Windows NT 4.0/2000/XP/Server 2003 workstations operate in a
peer-to-peer environment and communicate directly with the
Fiery when users send print jobs.
Many of the same prerequisites for setting up printing through a
Windows NT 4.0/2000/Server 2003 server also apply to setting up
Windows printing where a server is not present. The prerequisites
are summarized in the following list, and you can find more detail
in your Microsoft documentation.
• Print a Configuration page (see
Use the information on this page to determine the current Fiery
settings.
• Load the TCP/IP network protocol on the computer.
Windows 98/Me: Load File and printer sharing for Microsoft
Networks.
Windows 2000/XP: Load Client for Microsoft Networks.
• In the Windows Network Control Panel, verify the Workgroup
name of the computer. Make sure that the Workgroup name is the
same as the one listed in Fiery Setup.
• Windows 98/Me: In the File and printer sharing for Microsoft
Network Properties dialog box, specify Automatic or Enabled for
Browse Master, and select Yes for LM Announce.
• Windows 2000/XP: In the Client for Microsoft Networks
Properties dialog box, configure the computer to allow file
sharing, and then restart the computer.
• Ping the Fiery to verify TCP/IP communication is successful (see
page
• Insert the Sharp AR-C360P Driver CD and wait for it to autorun.
Sharp AR-C360P EFI Configuration Guide - 32
2-47).
page 5-143).