Declaration Of Conformity - Stanley FATMAX SFMCD715 Manual

Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
Voltage
No-load speed
Max. torque
Chuck capacity
Max Drilling capacity
/
Steel/wood masonry
Weight
Charger SFMCB10
Input Voltage V 230
AC
Output Voltage V 18
DC
Current A 1.25
SFMCB201
Battery
18
Voltage V
DC
1.5
Capacity
Ah
Li-Ion
Type
Level of sound pressure according to EN60745:
Sound pressure (L ) 88.5 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L ) 99.5 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN60745:
2
Drilling into metal (a ) 1.2 m/s
h, D
Impact drilling into concrete (a
h, ID
EC declaration of conformity
%
MACHINERY DIRECTIVE
SFMCD715 - Impact drill
STANLEY FATMAX Europe declares that these products
described under EN62841-1:2015, EN62841-2-
1:2018+A11:2019.
SFMCD715
V
DC
0-600/0-1900
-1
Min
Nm
mm
mm
1.2 (without battery)
kg
SFMCB11 SFMCB12
230 230
18 18
1.25 2
SFMCB202 SFMCB204 SFMCB206
18 18
2.0 4.0
Li-Ion Li-Ion
2
, uncertainty (K) 1.5 m/s
2
) 12.2 m/s , uncertainty (K) 1.5 m/s
(Original instructions)
These products also comply with Directive 2006/42/EC,
2014/30/EU and 2011/65/EU. For more information, please
contact STANLEY Europe at the following address or refer to
For more information, please contact STANLEY FATMAX at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
18V
60
1.5-13
13/30/13
SFMCB14
THE SUPPLY OF MACHINERY (SAFETY)
230
18
4
18
STANLEY FATMAX declares that these products described
6.0
under "technical data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
Li-Ion
EN62841-1:2015, EN62841-2-1:2018+A11:2019. These
products also conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016,
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
For more information, please contact STANLEY FATMAX at
2
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of STANLEY
Vice President Professional Power Tools EANZ GTS
the back of the manual.
STANLEY FATMAX.
General Manager, Benelux
Egide Walschaertsstraat 14-18
2800 Mechelen, Belgium

Declaration of conformity

REGULATIONS 2008
SFMCD715 - Impact drill
2008/1597 (as amended),
S.I.2016/1091 (as amended).
2012/3032 (as amended).
FATMAX
STANLEY FATMAX UK,
270 Bath Road, Slough
ENGLISH
Patrick Diepenbach
STANLEY FATMAX,
27.09.2019
Karl Evans
Berkshire SL1 4DX
England
27.09.2019
11