Sound Adjustment; Digital Clock Setting Procedure - Hitachi ZAXIS 17U-5N Owner's Manual

Sound Adjustment

When SOUND control switch (2) is pressed with the radio
switch ON, it will be in the sound adjustment state.
Each time SOUND control switch (2) is pressed, the
adjustment item can be changed as below.
BAL  TRE  BAS  BAL  TRE  BAS
When SOUND control switch (2) is pressed with the BAS
state, the sound adjustment is deactivated.
• Sound Adjustment (Balance Control)
When UP button (3) is pressed with the BAL state,
loudspeaker output is increased from R output by one
step. When DOWN button (3) is pressed with the BAL
state, loudspeaker output is decreased from L output by
one step.
• Sound Adjustment (Treble Control)
When UP button (3) is pressed with the TRE state, treble
level is increased by one step. When DOWN button (3) is
pressed with the TRE state, treble level is decreased by
one step.
• Sound Adjustment (Bass Control)
When UP button (3) is pressed with the Bas state, bass
level is increased by one step. When DOWN button (3) is
pressed with the Bas state, bass level is decreased by one
step.

Digital Clock Setting Procedure

Pushing DISP button (6) long in the clock display mode
makes the clock adjustable.
Pushing DISP button (6) in the clock adjustment mode will
switch over the time unit from hours to minutes. Push UP or
DOWN button (3) to adjust the time unit.
Push DISP button (6) in the minute adjustment mode to
deactivate the time adjustment.
OPERATOR'S STATION
1-12
3
6
3
Long push DISP button (6)
Push UP key (3)
Push DISP key (6)
Push UP key (3)
Push DISP key (6)
2
M1NE-01-003
M1NE-01-003
Time Display Mode
Push DOWN key (3)
Push DOWN key (3)
M1NE-01-007