Avoid Heating Near Pressurized Fluid Lines
Flammable spray can be generated by heating near
pressurized fluid lines, resulting in severe burns to yourself
and bystanders.
Do not heat by welding, soldering, or using a torch near
pressurized fluid lines or other flammable materials.
P ressurized lines can be accidentally cut when heat goes
beyond the immediate flame area. Install temporary
fire-resistant guards to protect hoses or other materials
before engaging in welding, soldering, etc..
Avoid Applying Heat to Lines Containing
Flammable Fluids
Do not weld or flame cut pipes or tubes that contain
flammable fluids.
Clean them thoroughly with nonflammable solvent
before welding or flame cutting them.
SAFETY
S-35
SA-030