Led Indicator - Logitech LIGHTSPEED G305 Setup Manual

LED INDICATOR

Battery life
Flashing red: battery <15%
DPI
Yellow: step 1 - 400 DPI
White: step 2 - 800 DPI (default)
Orange: step 3 - 1600 DPI
Magenta: step 4 - 3200 DPI
Blue: step 5 - 6400 DPI (Step 5 can be activated via software only)
Mode
Cyan: performance mode (default)
Green: endurance mode (can be activated via software only)
Tips:
– Activating endurance mode will degrade tracking performance
but improve battery life
G HUB SOFTWARE
You can customize the onboard profile settings using the G HUB
These settings include button programming, report rate,
performance/endurance modes and tracking behavior
G304 / G305 allows up to 5 DPI settings
By default, G304 / G305 has the following settings:
– DPI: 400/800/1600/3200
– Report rate: 1ms
– Performance mode
©2020 Logitech Logitech, Logitech G, Logi and their respective logos are trademarks or registered trademarks
of Logitech Europe S A and/or its affiliates in the U S and other countries All other trademarks are the property
of their respective owners Logitech assumes no responsibility for any errors that may appear in this manual
Information contained herein is subject to change without notice
7 ENGLISH