System Setup; Drive Bay; Installing 3.5"/2.5" Storage Drive - MSI S1102-01 User Manual

System Setup

⚠
Important
Before removing or installing any components, make sure the system is not turned on
or connected to the power.

Drive Bay

Installing 3.5"/2.5" Storage Drive

1. Engage two embossed pins on the carrier into the side dimples on the 3.5" drive.
For 2.5" drive, align the drive with the screw holes on the tray and secure it with
∙
screws*.
2. Carefully push down on the other side of the 3.5" drive until another two embossed
pins lock into place.
3. With the lever open, insert the drive carrier horizontally into the drive bay until the
locking lever engages.
4. Push the lever in to lock the carrier in place.
*Screws for 2.5" drive are not included in the package.
Screws for 2.5" Drive*
Screw Type: M3 Screw
Hat Diameter: 4.5mm*0.65mm
Length: 3.5mm
3.5" Drive
2.5" Drive
System Setup
27