Argus Security SW-SKT-01 User Manual page 6

Survey detector
1. By rotating it clockwise, remove the survey detector from its support base (picture 4).
2. Extract the battery cover from the bottom of the detector.
3. Insert both CR123A batteries into their detector's housing (picture 5).
Batteries polarities must match the indicated polarity on the detector.
4. Wait until the LEDs at the top of the detector stop blinking.
5. Reinstall the detector's battery cover.
6. Reinstall the detector on its base.
The survey detector is now ready for use.
Picture 5
Picture 4
info@argussecurity.it L20-SWSKT-0001 (vP.5)
6