Notice; Product Description; The Ranger Blood/Fluid Warming Unit - 3M Ranger 245 Operator's Manual

Check the 3M TM Ranger TM system website to ensure you have the most recent version of this document.
6 English

NOTICE:

1. Federal law (USA) restricts this device to sale by or on the order of a licensed healthcare
professional.
2. To avoid device damage:
• Do not clean the blood/fluid warming unit with solvents. Damage to the case, label, and
• Do not immerse the blood/fluid warming unit in cleaning or sterilizing solutions. The
• Do not insert metallic instruments in the blood/fluid warming unit.
• Do not use abrasive materials or solutions to clean the heater plates.
• Do not allow spills to dry inside the unit, as this may make it more difficult to clean the
3. The Ranger blood/fluid warming unit meets medical electronic interference requirements. If
radio frequency interference with other equipment should occur, connect the unit to a different
power source.

Product Description

The Ranger blood/fluid warming system consists of a Model 245 warming unit and a sterile
warming set.

The Ranger blood/fluid warming unit

The blood/fluid warming unit is a
compact, lightweight, liquid-resistant
device with a clamp located on the
side for attachment to an I.V. pole. A
carrying handle on the top of the unit
makes it easy to transport. Located on
the front panel you will find:
• Alphanumeric display that indicates
the heater temperature during normal
operation. In an over-temperature
condition, the display alternately
flashes a temperature of 43°C or
higher and the word "HI." An audible
alert also sounds. In an under-
temperature condition, the display
alternately flashes a temperature of
33°C or lower and the word "LO."
• Alert indicator light that comes
on when either an over- or under-
temperature condition occurs.
internal components may result.
unit is not liquid proof.
unit.
3M ™ Ranger ™ Blood/Fluid Warming System
Alert indicator light
Slot for cassette
Alphanumeric
Power switch
display
www.rangerfluidwarming.com reorder #202457B
I.V. pole clamp
Bubble trap holder