Polling - Sharp FO-4400 Operation Manual

Polling

Polling allows you to call another fax machine and have it send a document to
your machine without operator assistance. In other words, the receiving fax
machine, not the transmitting fax machine, initiates the transmission. You can
use your fax machine to both poll and be polled by others.
Polling others
To poll another fax machine, follow the steps below.
♦
If desired, you can dial more than one fax number to receive documents
consecutively from a group of fax machines (this is called "Serial Polling"; a
maximum of 154 fax machines can be polled in one operation).
1
MENU
Press
2
Dial the number(s) of the fax machine(s) you want to poll using one (or
more) of the following methods:
•
Press one or more Rapid Keys.
•
Enter one or more Speed Dial numbers, pressing
number. (If you enter less than 2 digits, press
•
Press one or more Group Keys.
•
Enter one or more full fax numbers with the numeric keys, pressing
after each full number.
Note: If you need to delete a number, press
appears in the display and then press
3
START/
Press
ENTER
and then .
6
. Reception will begin.
Display:
6: SERIAL POLL. MODE
ENTER STATION #
SPEED DIAL
START/
to complete the entry.)
ENTER
or until the destination
STOP
.
Polling
before each
START/
ENTER
71