Advertisement
3
WORK
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the seat. (
Main work
–
Pull locking mechanism
–
Fold open cover
S00302-10
–
Disconnect the negative cable
cle's electronics.
602677-11
–
Connect the battery charger to the battery. Switch on the battery charger.
Battery charger (58429074000)
You can also use the battery charger to test the open-circuit voltage and start
potential of the battery, and to test the alternator. With this device, you cannot
overcharge the battery.
Info
Charge the battery with a maximum of 10% of the capacity specified on the
battery housing.
602678-01
–
Switch off and disconnect the battery charger after charging.
Guideline
The charging current, charging voltage, and charging time must not be exceeded.
Charge the battery regularly when the
motorcycle is not in use
–
Connect both negative cables
Guideline
Screw, battery terminal
602677-11
–
Fold down cover
S00304-10
Finishing work
–
Mount the seat. (
p. 6)
in the direction of the arrow.
1
.
2
of the battery to avoid damage to the motorcy-
3
3 months
.
3
M6
and let it lock by pushing down lightly.
4
p. 6)
7
4.5 Nm
(3.32 lbf ft)
Advertisement
