Advertisement
Shaver
1
Foil & Cutter cassette
2
Cassette release buttons
3
Multi Head Lock switch
4
On / off button
5
Shaver display**
5a Travel lock
5b Replacement indicator for Foil & Cutter cassette
5c Status segments
5d Minutes left display
5e Cleaning indicator*
5f Plug reminder
5g Battery icon*
6
Precision trimmer
7
Shaver-to-station contacts
8
Release button for precision trimmer
9
Shaver power socket
10 Power supply**
10a Charging stand*/**
11 Travel case
* not with all models (see display box)
** design can differ
For electric specifications, see printing on the power supply.
Basic operating information
• A full charge takes 1 hour and provides up to 60 minutes of cordless shaving time.
This may vary depending on your beard growth and ambient temperature.
• Recommended ambient temperature for charging is 5 °C to 35 °C, for storage and
shaving it is 15 °C to 35 °C. The battery may not charge properly or at all under
extremely low or high temperatures.
• Do not expose the appliance to temperatures higher than 50 °C for extended
periods of time.
• When the shaver is connected to an electrical outlet, it may take some minutes until
the display illuminates.
Charging
• Connect the shaver to an electrical outlet by snapping the power supply (10) into the
power socket of the shaver (9) / the charging stand (10a). For cc models plug into
the station power socket (see chapter «Clean & Charge Station»).
• For first-time charge, charge continuously for at least 1 hour.
• The actual charge status is shown on the display.
Display
• The display information is dependent on the model.
• Some models only show icons during charging or operation. On other models
a series of icons is also shown after the shaver has been turned off.
• The table below shows the icons that can appear on the shaver display.
31
Advertisement
