Page 30
The cleaning cartridge contains a highly flammable liquid so keep it away from sources of ignition. Do not expose to direct sunlight and cigarette smoking nor store it over a radiator. Do not refill the cartridge and use only original Braun refill cartridges. *not with all models...
Shaver Foil & Cutter cassette Cassette release buttons Multi Head Lock switch On / off button Shaver display** 5a Travel lock 5b Replacement indicator for Foil & Cutter cassette 5c Status segments 5d Minutes left display 5e Cleaning indicator* 5f Plug reminder 5g Battery icon* Precision trimmer Shaver-to-station contacts...
Page 32
Battery status The battery status is shown with segments and additionally in digits (for some models also with a battery icon). • The status segments appear / disappear gradually with the status of the battery power. • The digital number shows the remaining shaving time in minutes.
Page 33
Using the brush, clean the inner area of the pivoting head. Do not clean the cassette with the brush as this may damage it! Clean & Charge Station (C & C)* The Clean & Charge Station has been developed for cleaning, charging, lubricating, disinfecting, drying and storing your Braun shaver.
Page 34
12 Station power socket Lift button for cartridge exchange 14 Station-to-shaver contacts 15 Clean & Charge Station display 15a Level indicator 15b Status light 15c Cleaning program indicators* 16 Start button Cleaning cartridge * not with all models (see display box) C &...
Accessories Braun recommends changing your shaver’s Foil & Cutter cassette every 18 months to maintain your shaver’s maximum performance. Available at your dealer or Braun Service Centres: •...
Trouble-Shooting Problem: Possible reason: Remedy: Shaver Shaver does not 1. The shaver can only be 1. Unplug the shaver start when operated cordless. 2. Press the on / off button for pressing the 2. Travel lock is activated. 5 seconds to unlock the shaver. on / off button.
Page 37
Clean & Charge Station Cleaning does 1. Shaver is not placed 1. Insert shaver into the Clean & Charge not start when properly in the Station and push it to the rear side of pressing the Clean & Charge the station (contacts of the shaver start button.