Timer And Rheostat Control Plugs - General Components BISON 2000A Owner's Manual

Timer and Rheostat Control Plugs

Use a single screw to fix the timer control or rheostat control in place. They
are best installed so that they can be seen and operated easily to identify
working conditions and for easy access. The black and clear plugs connect to
the corresponding plugs on the loom (below). The remaining three-pin
socket on the timer or rheostat control plugs into the remote-control
receiver if one is installed. An adaptor cable may be necessary.
Timer Control Plug
UNUSED
4 3
2 1
BROWN
Rheostat Control Plug
RED/WHITE
BROWN
BLUE/WHITE
RED/YELLOW
To Timer Control
Figure XXII
UNUSED
4 3
2 1
RED/YELLOW
To Rheostat Control
Figure XXIII
BLUE
4 3
2 1
GRAY UNUSED
BLUE
4 3
2 1
GRAY
BLACK
BLACK
RED
25