Installation Of Combustion Air Pipe And Exhaust - General Components BISON 2000A Owner's Manual

Installation of Combustion Air Pipe and Exhaust

The combustion air inlet pipe sucks in fresh air from outside of the vehicle
and the exhaust discharges fumes outside of the vehicle. Measures must be
taken to avoid the fumes from re-entering the vehicle.
The pipes should exit at the bottom of the vehicle, ensuring that the
openings are far enough away from any splashing water or dirt that can clog
them. Figure XIII shows the right and wrong way to install the pipework.
A B
A. Correct B. Wrong
Figure XIII
Only use the inlet pipe and exhaust provided with the kit for installation. The
exhaust pipe is made of corrugated stainless steel while the combustion pipe
is aluminium covered in paper and plastic. Do not confuse the two. Use the
supplied clamps to fix them securely to the combustion air inlet and the
exhaust outlet on the heater. The protective end cap on the outlet of the
16