Advertisement
ADDITIONAL IMPORTANT SAFEGUARDS cont.
1. To avoid circuit overload, do not operate another appliance on the same socket (circuit)
2. If an extension cord is absolutely necessary, a 15 ampere 14 gage cord should be used.
Cords rated for less amperage may overheat. Care should be taken to arrange cord so
that it cannot be pulled or tripped over.
3. Do not leave unattended when the system is connected to a power supply/electrical outlet.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
WARNING
: To reduce the risk of electric shock, this
appliance has a polarized plug (one
blade is wider than the other). This plug
will fit in a polarized outlet only one
way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to
install the proper outlet. Do not modify
the plug in any way.
CAUTION:
Hose can become hot during use.
NEVER hold, pull or relocate unit by the
hose while in use. When you need to
move the steamer, hold by the garment
rod. Hold the steamer head by the
handgrip and never by the hose.
2
FEATURES OF YOUR GARMENT STEAMER
1. The steam diffuser/handgrip at the
end of the steamer hose is located
just behind the garment brush. By
grasping the steam diffuser/handgrip
you can aim the direction of the
steam released from the nozzle.
Caution: The steam hose becomes hot
during use. Never hold, pull or move
unit by the hose while in use.
2. The garment brush with its small
openings is located at the end of the
steamer hose. Always place the
nozzle end of the hose on the
garment hanger when not in use.
Keep the nozzle pointed upwards
and steam will rise from the
openings. Try not to point the nozzle
downwards, water may condense in
the hose during idle periods and drip
from the nozzle.
3. The garment rod has a convenient
hook shaped end for resting the
nozzle end of the hose. It can be
extended and retracted by adjusting
the telescopic rod in its sleeve.
4. The On/Off switch button can be foot
activated to turn the power "ON" or
"OFF".
5. The ready light (green) comes on
when the unit is turned "ON".
6. The water tank is removable for easy
filling and is see through for easy
monitoring of the water level. The
screw cap is fitted with a one way
valve to ensure drip free replacement
of the water tank when refilling.
7. The Garment Steamer base houses
the reservoir, water tank, hose
attachment and adjustable garment
rod.
3
Advertisement
