Related Manuals for Euro-Pro SC926H
Summary of Contents for Euro-Pro SC926H
- Page 1 Professional Stainless Steel Steam Cleaner OWNER’S MANUAL Model SC926H 120V., 60 Hz, 13 A., 1550 W EURO-PRO OPERATING LLC 94 Main Mill Street, Door 16 Plattsburgh, NY 12901 Tel.: 1 (800) 798-7398...
-
Page 3: Important Safety Instructions
Should any defect covered by the terms of the limited warranty be discovered within one year, Euro-Pro Operating LLC will repair or replace any defective part provided the unit is returned by the original purchaser, freight prepaid, to: Euro-Pro Operating LLC, 94 Main Mill Street, Door 16, Plattsburgh, N.Y. - Page 4 ADDITIONAL IMPORTANT SAFEGUARDS 1. To avoid circuit overload, do not operate another appliance on the same socket (circuit) as the steam cleaner. 2. If an extension cord is absolutely necessary, an extension cord rated a minimum of 15 ampere, 14 gauge grounded cord should be used. Cords rated for less amperage may overheat.
- Page 5 TIPS ON HOW TO USE YOUR SYSTEM Blinds Fiberglass or Stainless Steel Surfaces Use the bristle brush. Slowly move the Use the nylon bristle brush to clean brush over the surface to be cleaned. blinds. Move the brush over the The vapor will emulsify the dirt and surface, allowing enough time for the vapor to penetrate.
- Page 6 FEATURES OF YOUR STEAM CLEANER 3. Heavy-duty crush-resistant 1. Multipurpose Steam Cleaner: hose. Bathrooms, kitchens, living areas, pet areas and appliances. Automotive, patio and windows. 2. Stainless Steel Boiler: Non-corroding, stainless steel boiler. Welded 4. Versatile, quick-change construction. accessories 3. Variable Steam: Allows you to adapt the steam flow to the job.
- Page 7 OPERATING INSTRUCTIONS Water Care and Maintenance • If you consistently use demineralized or distilled water, cleaning the tank is • unnecessary. Rinsing Out the Steam Cleaner Normally, a periodic rinse of your steam cleaner will free it from deposits. This is recommended every 10-15 tankfulls, to free up any scale deposits from the tank.
- Page 8 OPERATING INSTRUCTIONS Step 8: Connect desired attachments NOTE: onto the flexible steam hose. Step 9: Plug the unit into a standard (120 volt, grounded) wall receptacle. Allow approximately 18 minutes for vapor to reach its working wall receptacle prior to attaching or temperature and pressure.
Need help?
Do you have a question about the SC926H and is the answer not in the manual?
Questions and answers