Table of Contents
Advertisement
Available languages
Available languages
A12C
SLEEP MODE
Sleep mode can only be activated in cooling mode.
Sleep mode comes with the following settings:
•
After 2 hours the preset temperature is increased by 1 °C.
•
After another 2 hours the temperature is again increased by 1 °C, thus the preset
temperature is increased by a total of 2 °C within 4 hours. Afterwards the temperature is
kept at this value.
•
The fan speed is automatically lowered to the min. level and cannot be changed
manually. The swing function can be switched on via the remote control, if required.
To activate sleep mode, please proceed as follows:
1.
Press the Mode button (26) until the cooling mode indicator (20) appears on the control
panel.
2.
Simultaneously press the Timer (17) and UP (19) buttons. The sleep mode indication "SL"
appears on the segment display (29). The fan speed is automatically adjusted to the
lowest level.
3.
To switch the sleep mode off press the Timer (17) and UP (19) buttons simultaneously
once again. Fan speed and temperature will return to the level that was set before sleep
mode was activated.
www.blaupunkt.com
17
Advertisement
Table of Contents
