Blaupunkt BAC-PO-0012-C02D Instruction Manual page 16

A12C
4. SETTING THE TIMER
The timer has two modes of operation:
1. Automatic switch-on upon expiry of a preset number of hours.
2. Automatic switch-off upon expiry of a preset number of hours.
The number of hours can range from 1 to 24 and can be adjusted in increments of 1 h. Do not
leave the operating device unattended in a freely accessible room with an activated timer.
AUTOMATIC SWITCH-ON
The device is switched off.
1. Press the Timer button (17).
2. Press the UP (19) or DOWN button (23) until the desired number of hours is displayed.
The number of hours flashes on the segment display (29).
3. Wait for approx. 5 seconds in order to save the setting. The timer setting equals the
desired number of hours. The hours are indicated on the segment display (29). The device
starts in the previously selected operating mode after the set time has elapsed.
4. The settings are retained, even if the power supply is disconnected.
5. Manually switching the device on disables the automatic switch-on function.
6. If you select 0 hours, the timer will be off.
AUTOMATIC SWITCH-OFF
The device is switched on.
1. Press the Timer button (17).
2. Press the UP (19) or DOWN button (23) until the desired number of hours is displayed.
The number of hours flashes on the segment display (29).
3. Wait for approx. 5 seconds in order to save the setting. The display changes back to the
previous indication. The timer indicator (31) appears on the control panel. The timer
setting equals the desired number of hours. The device switches off after the set period of
time.
www.blaupunkt.com
16