Table of Contents
Advertisement
IMPORTANT INFORMATION
1. Use only a compatible VTech power adapter. To order a power adapter, visit
our website at
2. The power adapter is intended to be correctly oriented in a vertical or floor
mount position. The prongs are not designed to hold the plug in place if it is
plugged into a ceiling, under-the-table or cabinet outlet.
Initializing and registering the phone
Please note: You will need the registration information received from your
Internet service provider or your network administrator - normally the phone or
extension number, the password, and the registrar.
After you have set up the phone and connected it to the network as shown on
page 13, the phone begins to initialize.
Normally the initialization is completely automatic, using DHCP. If your network
does not support DHCP, you must obtain the IP address, netmask, IP gateway,
and DNS server from your Internet service provider or your network administrator
and enter them manually when you are asked to do so on the display.
Watch the display and, when asked to, make selections with
with
.
1. Language. The default is English.
2. Time zone
3. Dial tone
4. Enter the account number. Save with
5. Enter the registrar. Save with
For further information, please refer to the VSP875G User Guide.
businessphones.vtech.com
or call
.
. The display now shows the idle screen:
14
1 (888) 370-2006
and save
.
Advertisement
Table of Contents
