Sega Sonic Adventure 2: Battle User Manual page 15

STARTING THE GAME
Y Using Progressive Scan TV
This software is compatible with progressive scan video output, using the
Component Video Cable (sold separately). Please refer to the instruction
manual of Nintendo GameCube™ for directions on how to connect.
1 Connect your TV set and Nintendo GameCube™ with Component
Video Cable.
2
Place the Sonic Adventure 2 Battle Game Disc, close the Disc Cover,
and press the POWER Button.
3
After the Nintendo GameCube™ logo is displayed, press and hold
the B Button.
4
You will be asked whether to display in Progressive Mode. Select
"Yes" and the game will be displayed with Progressive Scan output.
Once the Progressive Mode is selected, unless the video cable is changed,
the Display Mode Select screen will be displayed each time the power is
turned on, without pressing the B Button. Also, depending on the type of
television set you are using, the horizontal/vertical ratio of the screen may
be changed.
STARTING THE GAME
Press START/PAUSE during the Title Screen to access
the Memory Card Screen. Use the Control Stick/
+Control Pad to select a Memory Card, and press the
A Button to enter. Note that the data will not be auto-
matically saved if you press the B Button to cancel.
26
SAVE FILE SELECTION
After selecting a Memory Card, a Save File Select
Screen will be displayed. If there is no Game Data,
make a new one. To make a new file, a Memory Card
with 3 Blocks of free space for the Main Data and 8
Blocks for the Chao Data is required. Selecting a file
and entering the selection enable you to save the
game progress on this file.
Save File
There are 2 kinds of save files to use in this game.
For more details, please see below.
FILE
Main Data
Chao Data
BLOCKS USED SEE PAGE
3 P.27
8 P.50
The same amount of data as the Free Blocks can
be saved.
Total Number of Collected Emblems
The last character played.
Once the file is selected, the data will be saved automatically on the file until
the game is finished. Please do NOT turn the power off or unplug the Memory
Card during saving. See Options on P.49 for how to change the game file during
the game.
MODE SELECTION
If the file to be used for saving is selected, a Mode
Select Screen is displayed. Use the up and down of
the Control Stick/+Control Pad to select a mode and
press the A Button to enter.
1P PLAY
Play a one-player game. You can play either HERO side or DARK side stories.
2P BATTLE
Play battle mode. Connect Controllers to Controller Socket 1 and 2.
EXTRA
Extra features such as the game tutorial by Chao.
OPTIONS
Change various game settings.
Free Blocks in the Memory Card
File Number
The Last Cleared Stage
Total Play Time
Player's Character
27