Table of Contents
Advertisement
Safety Information
WARNING
Ventilation
Never cover the ventilation holes or insert
anything into the cabinet.
Leave space around the display as shown
below.
Installed with stand
Leave at least this much space around the set.
30 cm
10 cm
Installed on the mount arm
Leave at least this much space around the set.
30 cm
10 cm
To ensure proper ventilation and prevent the
collection of dirt or dust:
- Do not lay the display flat, install upside down,
backwards, or sideways.
- Do not place the display on a shelf, rug, bed or
in a closet.
- Do not cover the display with a cloth, such as
curtains, or items such as newspapers, etc.
- Do not install the display as shown below.
Never install the display as follows:
Air circulation is blocked.
The ventilation holes on the back are
blocked, and heat builds inside.
4
EN
6 cm
10 cm
2 cm
10 cm
Do not block the air circulation area.
Note
Inadequate ventilation can lead to overheating
of the display and may cause damage to your
display or cause a fire.
AC power cord (mains lead)
Handle the AC power cord (mains lead) and
socket as follows in order to avoid any risk of fire,
electric shock or damage and/or injuries:
Use only AC power cord (mains lead) supplied
by Sony, not other suppliers.
Insert the plug fully into the AC power outlet
(mains socket).
Operate the display on a 220 V – 240 V AC
supply only.
When wiring cables, be sure to unplug the AC
power cord (mains lead) for your safety and
take care not to catch your feet on the cables.
Disconnect the AC power cord (mains lead)
from the AC power outlet (mains socket) before
working on or moving the display.
Keep the AC power cord (mains lead) away
from heat sources.
Unplug the AC power plug (mains plug) and
clean it regularly. If the plug is covered with
dust and it picks up moisture, its insulation may
deteriorate, which could result in a fire.
Notes
Do not use the supplied AC power cord (mains
lead) on any other equipment.
Do not pinch, bend, or twist the AC power cord
(mains lead) excessively. The core conductors
may be exposed or broken.
Do not modify the AC power cord (mains lead).
Do not put anything heavy on the AC power
cord (mains lead).
Do not pull on the AC power cord (mains lead)
itself when disconnecting the AC power cord
(mains lead).
Do not connect too many appliances to the
same AC power outlet (mains socket).
Do not use a poor fitting AC power outlet
(mains socket).
Air circulation
Advertisement
Table of Contents
