Table of Contents
Advertisement
Screen:
Although the screen is made with high-
precision technology and 99.99 % or more of
the pixels are effective, black dots may appear
or bright points of light (red, blue, or green)
may appear constantly on the screen. This is a
structural property of the screen and is not a
malfunction.
Do not push or scratch the front filter, or place
objects on top of this display. The image may
be uneven or the screen may be damaged.
If this display is used in a cold place, a smear
may occur in the picture or the picture may
become dark. This does not indicate a failure.
These phenomena disappear as the
temperature rises.
Ghosting may occur when still pictures are
displayed continuously. It may disappear after
a few moments.
The screen and cabinet get warm when this
display is in use. This is not a malfunction.
The screen contains a small amount of liquid
crystal. Follow your local ordinances and
regulations for disposal.
CLEANING
When cleaning, be sure to unplug the AC power
cord (mains lead) to avoid any chance of electric
shock.
Wipe the screen surface gently with the
supplied cleaning cloth to remove dirt.
Stubborn stains may be removed with the
supplied cleaning cloth slightly dampened
with a mild detergent solution.
The screen may become scratched if the
supplied cleaning cloth is dusty.
Do not spray water or detergent directly on the
display. It may drip to the bottom of the screen
or exterior parts, and may cause a malfunction.
If using a chemically pretreated cloth, please
follow the instruction provided on the package.
Never use strong solvents such as a thinner,
alcohol or benzine for cleaning.
Do not plug in the display into the wall outlet
until the moisture from cleaning has
evaporated.
Periodic vacuuming of the ventilation openings
is recommended to ensure to proper
ventilation.
Optional Equipment
Keep optional components or any equipment
emitting electromagnetic radiation away from
the display. Otherwise picture distortion and/
or noisy sound may occur.
This equipment has been tested and found to
comply with the limits set out in the EMC
Standards using a connection signal cable
shorter than 3 meters.
Disposal of the Display
Disposal of old electrical & electronic
equipment (applicable in the European
Union and other countries with separate
collection systems)
Reduction in the Use of Hazardous Substances
in Electrical & Electronic Equipment (Applicable
in Republic of India)
This product and its components,
consumables, parts or spares comply with the
hazardous substances restriction of India's E-
Waste (Management) Rules. The maximum
allowable concentrations of the restricted
substances are 0.1% by weight in homogenous
materials for Lead, Mercury, Hexavalent
Chromium, Polybrominated Biphenyls (PBB)
and Polybrominated Diphenyl Ethers (PBDE),
and 0.01% by weight in homogenous materials
for Cadmium, except for the exemptions
specified in Schedule II of the aforesaid Rules.
Installation/Set-up
Install and use the display in accordance with
the instructions below in order to avoid any risk
of fire, electric shock or damage and/or
injuries.
Installation
The display should be installed near an easily
accessible AC power outlet (mains socket).
Place the display on a stable, level surface to
prevent it from falling over and causing
personal injury or property damage.
Install the display where it cannot be pulled,
pushed, or knocked over.
7
EN
Advertisement
Table of Contents
