Sony ELF-SR2 Operating Instructions Manual page 5

Spatial reality display
Hide thumbs Also See for ELF-SR2:
Table of Contents

Advertisement

Never insert USB plug when the product or
charging cable is wet condition
When the USB plug is inserted in a wet
condition, a short circuit occurs due to the
liquid (tap water, salt water, refreshing drink
etc.) attached to the main unit and charging
cable or foreign matter, it may cause abnormal
heat generation or malfunction.
NOTE ON AC ADAPTER
Warning
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
To prevent fire or shock hazard, do not place
objects filled with liquids, such as vases, on the
apparatus. Do not install this equipment in a
confined space, such as a bookshelf or similar
unit.
Please ensure that the AC power outlet (mains
socket) is installed near the equipment and
shall be easily accessible.
Be sure to use the supplied AC adapter and AC
power cord (mains lead). Otherwise it may
cause a malfunction.
Connect the AC adapter to an easily accessible
AC power outlet (mains socket).
Do not coil the AC power cord
(mains lead) around the AC
adapter. The core wire may be cut
and/or it may cause a
malfunction of the media receiver.
Do not touch the AC adapter with wet hands.
If you notice an abnormality in the AC adapter,
disconnect it from the AC power outlet (mains
socket) immediately.
The set is not disconnected from the AC power
(mains) source as long as it is connected to the
AC power outlet (mains socket), even if the set
itself has been turned off.
As the AC adapter will become warm when it is
used for a long time, you may feel hot when
touching it by hand.
Prohibited Usage
Do not install/use the display in locations,
environments or situations such as those listed
below, or the display may malfunction and cause
a fire, electric shock, damage and/or injuries.
Locations:
Outdoors (in direct sunlight), at the seashore,
on a ship or other vessel, inside a vehicle,
unstable locations, near water, rain, moisture
or smoke.
Environments:
Places that are hot, humid, or excessively
dusty; where insects may enter; where it might
be exposed to mechanical vibration, near the
source of naked flame, such as lighted candle,
which is placed on a display. The display shall
not be exposed to dripping or splashing and no
objects filled with liquids, such as vases, shall
be placed on the display.
Situations:
Use when your hands are wet, with the cabinet
removed, or with attachments not
recommended by the manufacturer.
Disconnect the display from AC power outlet
(mains socket) during lightning storms.
Install the display so that it sticks out into an
open space. Injury or damage from a person or
object bumping into the display may result.
Place the display in a humid or dusty space, or
in a room with oily smoke or steam (near
cooking tables or humidifiers). Fire, electric
shock, or warping may result.
Install the display in places subject to extreme
temperature such as in direct sunlight, near a
radiator or a heating vent. The display may
overheat in such condition which can cause
deformation of the enclosure and/or display
malfunction.
If the display is placed in the changing room of
a public bath or hot spring, the display may be
damaged by airborne sulfur, etc.
For best picture quality, do not expose the
screen to direct illumination or sunlight.
Avoid moving the display from a cold area to a
warm area. Sudden room temperature changes
may cause moisture condensation. This may
cause the display to show poor picture and/or
poor colour. Should this occur, allow moisture
to evaporate completely before powering the
display on.
Broken pieces:
Do not throw anything at the display. The
screen glass may break by the impact and
cause serious injury.
If the surface of the display cracks, do not touch
it until you have unplugged the AC power cord
(mains lead). Otherwise this may cause an
electric shock.
5
EN

Advertisement

Table of Contents
loading

Table of Contents