Adaptive Cruise Control - Chevrolet Bolt EUV 2023 Owner's Manual

Chevrolet Bolt EUV Owner Manual (GMK-Localizing-MidEast-16409246) -
2023 - CRC - 4/7/22
Increasing Speed While Using Cruise Control
If the cruise control system is already
activated:
Press and hold +RES until the vehicle
accelerates to the desired speed, then
release it.
To increase the speed in small increments,
briefly press +RES. For each press, the
vehicle goes about 1 km/h faster.
The speedometer reading can be displayed
in either English or metric units. See
Instrument Cluster 0 75. The increment value
used depends on the units displayed.
Reducing Speed While Using Cruise Control
If the cruise control system is already
activated:
Press and hold SET until the desired
lower speed is reached, then release it.
To slow down in small increments, briefly
press SET. For each press, the vehicle
goes about 1 km/h slower.
The speedometer reading can be displayed
in either English or metric units. See
Instrument Cluster 0 75. The increment value
used depends on the units displayed.
Passing Another Vehicle While Using Cruise
Control
Use the accelerator pedal to increase the
vehicle speed. When you take your foot off
the pedal, the vehicle will slow down to the
previous set cruise speed. While pressing the
accelerator pedal or shortly following the
release to override cruise control, briefly
pressing SET will result in cruise control set
to the current vehicle speed.
Using Cruise Control on Hills
How well the cruise control works on hills
depends upon the vehicle speed, load, and
the steepness of the hills. When going up
steep hills, you might have to step on the
accelerator pedal to maintain the vehicle
speed. When going downhill, you might
have to brake or shift to a lower gear to
keep your speed down. If the brake pedal is
applied, cruise control will disengage.
Ending Cruise Control
There are five ways to end cruise control:
Step lightly on the brake pedal.
Press .
Shift the electric drive unit to N (Neutral).
Driving and Operating
Press to turn the cruise control system
off completely.
Activate Regen on Demand. See Regen
on Demand under Regenerative Braking
0 171.
Erasing Speed Memory
The cruise control set speed is erased from
memory if is pressed or if the vehicle is
turned off.

Adaptive Cruise Control

If equipped, Adaptive Cruise Control (ACC)
allows the cruise control set speed and
following gap to be selected. Read this
entire section before using this system. The
following gap is the following time between
your vehicle and a vehicle detected directly
ahead in your path, moving in the same
direction. If no vehicle is detected in your
path, ACC works like regular cruise control.
ACC uses a windshield mounted front
camera sensor.
If a vehicle is detected in your path, ACC can
apply acceleration or limited, moderate
braking to maintain the selected following
gap. To disengage ACC, apply the brake.
175