Laura Ashley ASHWELL Quick Start Manual

Bed

Table of Contents

Download this manual

Thank you for purchasing this product. Please read the instructions carefully before use to ensure safe and

satisfactory operation of this product.

Please check the pack contents before you begin. A full checklist of components is given in this leaflet. If any

components are missing, please contact the retailer from whom you bought this product.

Safety Advice and Assembly Recommendations

Do not stand or lean on this product.

Make sure the area is clear when unpacking and positioning this product.

This product is heavy; it should be assembled as near as possible to the point of use.

Take care when lifting to avoid personal injury and /or damage to the product.

Keep small children/pets away from the assembly area. This product has small component parts that are a

choking hazard.

Make sure you assemble this product correctly as per the instructions, and ensure all fittings are tight.

A minimum of two people is required to lift the bed into its position

We recommend that the packaging is used to protect the surfaces during assembly.

ASHWELL Bed

Table of Contents

Do you have a question about the ASHWELL and is the answer not in the manual?

Page 1 ASHWELL Bed Thank you for purchasing this product. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Please check the pack contents before you begin. A full checklist of components is given in this leaflet. If any components are missing, please contact the retailer from whom you bought this product.
Page 2 Fittings and parts checklist Bolt M8X30 x 12 Allen Key x 1 Screw Ø 3.5 x25 x 12 Dowel D8X25 x 8 Step by step assembly instructions A minimum of two people is required to assemble this product. Step One Attach one side rail to the headboard.
Page 3 Step Three Repeat steps one and two with the other side rail. Step Four - Attach 2 of the adjustable support legs to the centre rail. Attach by screwing clockwise. Step Five - Place the centre rail into position by pressing the metal brackets onto each other.
Page 4 - To compensate for uneven floors, adjust the middle support legs, as necessary. Leave a small gap between a foot and a floor. The foot should only touch the floor when sleeping in a bed. Care and Maintenance: please refer to Laura Ashley Care Guide.