TECHNICAL SPECIFICATIONS backset 20 Counter lock ELECTRIC LOCK FOR SLIM FRAME SLIDING DOORS Heavy duty electric lock with mechanical override to secure a slim sliding door. Counter lock with bolt release system, retracted when the door is open. › Stainless steel lock and counter lock body, nickeled tempered steel block pin. ›...
Page 3
Item 23622S Item 23624S Item 23822S Item 23824S Power supply 12 Vdc 24 Vdc Power consumption 500 mA Holding force 800 kg 800 kg Opening overload Max 50 N Max 50 N By means of contact By means of contact Pin status reporting COM./N.O./N.C.
ELECTRICAL CONNECTIONS COM. PIN STATUS N.O. REPORTING N.C. N.C. with item 23622/24S N.O. N.O. with item 23822/24S N.C. +PWR - PWR POWER SUPPLY WITH TIME DELAY ITEM 05310 OPENING BUTTON POWER SUPPLY: 12 Vdc / 1 A item 23622S/822S 24 Vdc / 500 mA item 23624S/824S PIN STATUS REPORTING: remote reporting of the inserted/non inserted pin status.
COM. PIN STATUS N.O. REPORTING N.C. N.O.¹ N.C.¹ COM. PULS TIMER CIRCUIT OPENING BUTTON POWER SUPPLY Item 23622S¹ Item 23624S¹ N.O. N.C. COM. ¹ Item 23822S / 23824S Connect the positive contact of the lock connector to the N.O. contact of the timer circuit (instead of the N.C.
INSTALLATION Locate the desired installation position of the electric lock on the frame. Cut a suitable hole in the frame in order to insert the lock and cut the hole for the cylinder. Refer to the dimension diagram located in the TECHNICAL SPECIFICATIONS section.
FIXED STRIKING PLATE INSTALLATION - Item + CF Place the striking plate in face of the lock. Slide to close the door in order to locate the exact position to make the proper hole into the door. Cut a suitable hole in the door, then install the striking plate by using suitable screws.
Page 8
Check for proper grounding when connecting to the power supply. Disposal of packaging in the appropriate containers is recommended. USER MANUAL RoHS OPERA s.r.l. Via Portogallo, 43 41122 Modena (MO) - Italy www.opera-italy.com info@opera-access.it...