Figure 54. Remove the EDP cable
Go to
https://support.lenovo.com/partslookup
replacement part:
EDP cable
Remove the PMIC board (for glass models)
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 32
"Remove the upper case" on page 46
"Remove the strip cover (for glass models)" on page 54
"Remove the LCD panel (for glass models)" on page 60
Step 1.
Remove the PMIC board copper foil from the PMIC board.
Figure 55. Remove the PMIC board copper foil
64
IdeaPad Slim 7i Pro (14", 5) Hardware Maintenance Manual
to look up the Lenovo part numbers of the following