Remove The I/O Bracket - Lenovo IdeaPad Slim 7 Pro Hardware Maintenance Manual

Go to
https://support.lenovo.com/partslookup
replacement part:
Heatsink

Remove the I/O bracket

Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 32
Step 1. Disconnect the battery pack cable.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Figure 17. Disconnect the battery cable
Step 2. Remove two screws and then remove the I/O bracket.
40
IdeaPad Slim 7i Pro (14", 5) Hardware Maintenance Manual
to look up the Lenovo part numbers of the following