Remove The System Board - Lenovo IdeaPad Slim 7 Pro Hardware Maintenance Manual

Remove the system board

Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 32
"Remove the M.2 solid-state drive" on page 34
"Remove the Wi-Fi card" on page 35
"Remove the fan " on page 37
"Remove the heatsink" on page 39
"Remove the I/O bracket" on page 40
Step 1. Remove four screws.
Figure 23. Remove four screws
Screw specifications
M2 x L2.7
Step 2. Disconnect the EDP cable, camera cable, speaker cable, keyboard cable, keyboard backlight
cable, touch pad cable and antenna cable from the system board.
44
IdeaPad Slim 7i Pro (14", 5) Hardware Maintenance Manual
Number of screws
4