Katadyn MOT-31 Manual page 16


Start the Pump

Open cleaning valve C

Clean the filter elements and inside of the housing with the
cleaning hose.

Close cleaning valve C

Stop the Pump

Open the drain valve D and empty the filter housing

Close the cover and tighten the locking bolts with a
maximum of 17 Nm.

The MOT-31/54 is ready for refilling or for storage
Before storage, the filter elements must air dry for at least two days.

Check the filter elements using the measuring gauge. To do so, refer to
Chapter 7.3 in this manual: "Examining the filter elements."
16