Table Of Contents; Introduction - Husqvarna DE 110 H Operator's Manual

Introduction..................................................................... 2
Safety..............................................................................5
Operation........................................................................ 9
Maintenance................................................................. 16
Troubleshooting............................................................ 21
Owner responsibility
WARNING:
stone by methods such as cutting, grinding
or drilling, especially during dry operation,
generates dust that comes from the material
being processed, which frequently contains
silica. Silica is a basic component of sand,
quartz, brick clay, granite and numerous
other minerals and rocks. Exposure to
excessive amount of such dust can cause:
Respiratory disease (affecting your ability
to breathe), including chronic bronchitis,
silicosis and pulmonary fibrosis from
exposure to silica. These diseases may be
fatal;
Skin irritation and rash.
Cancer according to NTP* and IARC* */
National Toxicology Program, International
Agency for Research on Cancer.
Take precautionary steps:
Avoid inhalation of and skin contact with
dust, mist and fumes.
Wear and ensure that all bystanders
wear appropriate respiratory protection such
as dust masks designed to filter out
microscopic particles. (See OSHA 29 CFR
Part 1926.1153)
To minimize dust emissions use an
appropriate dust extractor.
It is the owner's/employer's responsibility that the
operator has sufficient knowledge about how to use the
product safely. Supervisors and operators must have
read and understood the Operator's Manual. They must
be aware of:
• The product's safety instructions.
2
Contents

Introduction

Processing of concrete and
Transportation, storage and disposal........................... 23
Technical data.............................................................. 26
Warranty....................................................................... 28
Registered trademarks................................................. 29
• The product's range of applications and limitations.
• How the product is to be used and maintained.
National/Local regulations could restrict the use of this
product. Find out what regulations are applicable where
you work before you start using the product.
Product description
The product is a single phase dust extractor. Dust-laden
air goes through the suction hose into the inlet valve.
The product separates the dust particles from the air.
The particles falls into the plastic bag at the bottom of
the product.
Intended use
WARNING:
on the machine for purposes specified in the
instructions.
WARNING:
sources, hot particles, liquids, explosive
material and unstable or pyrophoric
particles.
The product is for professional operations only. The
product is used to collect and remove dry material from
machines and devices. The material can be dangerous
and harmful to health, refer to the dust class H in EN
60335-2-69.
You can connect an electric power tool to DE 110 H
230V with the power outlet. Make sure that the power
consumption (W) of the power tool is not more than
the maximum power consumption (W) identified on the
power outlet.
Do not use the product for other tasks. Only use the
product with accessories that are approved by the
manufacturer.
Only use the socket outlet
Do not collect ignition
1587 - 011 - 06.03.2023