Table of Contents
Advertisement
Polaris RZR Source Unit Mounting Instructions
4) Push the dash assembly into place until as shown in image
4 until you feel and hear a snap as the entire assembly seats
into place.
4
5) Re-attach the original metal clip with the T40 screw once the
entire assembly is seated into place. Check the front panel to
ensure the unit is secure in that location.
5
6) You're eady to test out the unit. Initial checks include:
•
Unit powers on with the key in ignition position
•
All sources work (Bluetooth, USB, AM/FM/WB)
•
Balance and, if applicable, fader are correct
•
All speakers you've connected play music
•
A subwoofer, if used, is working properly
Check page 22 of this manual for troubleshooting tips.
6
T40 Torx Screw
Advertisement
Table of Contents
