Toshiba MMD-AP0721HP-UL1 Service Manual page 37

Confirming the indoor unit addresses and the position of an indoor unit using the remote
control
Confirming the numbers and positions of indoor units
To see the indoor unit address of an indoor unit which you know the position of indoor unit.
When the unit is individual (the indoor unit is paired with a wired remote control one-to-one), or
it is a group-controlled one.
(Execute it while the units are running.)
1
ON / OFF
Push the button if the units stop.
2 UNIT LOUVER
Push the button (left side of the button).
1-1 1-1 1-1 1-1 1-1
A unit numbers is indicated on the LCD (it will disappear after a few seconds). The indicated number shows the
system address and indoor unit address of the unit.
When 2 or more indoor units are connected to the remote control (group-controlled units), a number of other
connected units appears each time you push the
°F
TEMP. ON / OFF
TIMER SET FAN MODE
TIME SAVE VENT
FILTER
RESET TEST SET CL SWING/FIX UNIT LOUVER
UNIT LOUVER
button (left side of the button).
- 37 -
1
Starts
running
2