Samsung NX58R9311SS/AA User Manual page 38

Troubleshooting
Problem Possible cause
The oven light The oven door lock is
(lamp) will not turn turned on.
on.
The Sabbath function has
been activated.
A loose or burned-out
bulb.
The switch operating the
oven light needs to be
replaced.
The oven smokes Meat or food was not
excessively during properly prepared before
broiling. broiling.
Improperly positioned
top oven rack.
The controls are not
being set properly.
Greasy buildup on oven
surfaces.
38 English
NX58R9311SS_AA_DG68-00905B-00_EN+MES+CFR.indb 38
Solution
The display will show the Cooking is
Lock icon. Hold the oven door finished, but the
open, and then press the cooling fan is still
START/SET pad for 3 seconds. running.
The oven will beep and the
Lock icon will turn off.
The oven will not
SAb and the time of day self-clean.
will show in the display. All
other controls and signals
will be deactivated. To cancel
the Sabbath function and
reactivate the light switch and
other controls, press and hold
the Bake and Number 1 pads
simultaneously for 3 seconds.
See page 33.
Call for a qualified service
technician.
Cut away excess fat and/or
fatty edges that may curl.
See the broiling guide on page
20. A crackling or
popping sound.
See page 19.
Regular cleaning is necessary
when broiling frequently.
Problem Possible cause
The fan automatically
runs for a certain amount
of time to ventilate the
inside of the oven.
The oven door lock is
turned on.
The oven is too hot.
The self-cleaning oven
controls are not properly
set.
A surface burner is on.
This is normal.
Solution
This is not a product
malfunction. The fan is
designed to run automatically
for a period of time to cool
down the oven.
The display will show the
Lock icon. Hold the oven door
open, and then press the
START/SET pad for 3 seconds.
The oven will beep and the
Lock icon will turn off.
Let the oven cool down, and
then reset the controls. The
self-clean cycle will not lock
the oven door if the oven
temperature is too hot. The
door must lock before the self-
clean cycle can start.
Reset the self-cleaning oven
controls. (See page 31.)
Turn off the surface burner.
Self-clean will not operate if a
surface burner is on.
This is the sound of the metal
heating and cooling during
any cooking or cleaning
function.
2019-05-30 6:11:15