Samsung NX58R9311SS/AA User Manual page 24

Gas slide-in range
Table of Contents

Advertisement

Available languages

Available languages

Gas oven
To enable the Sabbath option
1
1. Press the Bake pad.
2. Enter a desired temperature using the number pad. The default temperature is
350 °F.
3. Press the START/SET pad. The display temperature changes after the oven
temperature reaches 175 °F.
4. Press the Bake and Number 1 pads simultaneously for 3 seconds to display
"SAb". Once "SAb" appears, the oven control no longer beeps or displays any
further changes.
24 English
NX58R9311SS_AA_DG68-00905B-00_EN+MES+CFR.indb 24
4
2
3
NOTE
• You can change the oven temperature once baking starts, but the display will not
change or beep. After changing the temperature, it takes 15 seconds before the
oven recognizes the change.
• You can turn off the oven at any time by pressing OVEN OFF. However, this
doesn't deactivate the Sabbath option.
• To deactivate the Sabbath option, hold down Bake and the Number 1
simultaneously for 3 seconds.
• You can set the cooking time before activating the Sabbath option.
• After a power failure, the oven will not resume operation automatically. "SAb" will
appear in the control panel, but the oven will not go back on. Food can be safely
removed from the oven, but you should not turn off the Sabbath option and turn
the oven back on until after the Sabbath/Holidays.
• After the Sabbath observance, turn off the Sabbath option by pressing and
holding Bake and the Number 1 simultaneously for at least 3 seconds.
CAUTION
• Do not attempt to activate any other functions except for Bake when the Sabbath
option is on. Only the following pads will function properly: Number pads, Bake,
Oven Start/Set, and Oven Off.
• Do not open the oven door or change the oven temperature for about
30 minutes after you have started the Sabbath option. Let the oven reach the set
temperature. The oven fan operates only when the oven temperature increases.
2019-05-30
6:11:11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nx58 931 series

Table of Contents