Table of Contents
Advertisement
1886
Secure each blade to a blade iron as shown using the blade nuts and grommets, found in
the
hardware bag, and the blade assembly screws, found in the
Repeat x5
7
Ceiling Bracket
Downrod
Installing the Canopy
Lift the canopy into place so that
the screw holes are aligned.
Installing the Blades:
hardware bag.
Hanging Fan
Wiring
Insert the two canopy screws
found in the
hardware bag.
Blade Screw
bag
NOTE: Follow the instructions on the blade. Installing it
incorrectly could result in your fan not functioning.
Lightly attach the blade arms to the motor with
the blade arm screws, then securely tighten
after both screws are attached.
Note:
Fan style may vary.
Canopy
Blades
Canopy Screw
bag
Grommet
x15
bag
Blade Nut
IMPORTANT
Remember the screws that you
kept after removing the shipping
blocks? You need them for this step.
x10
Blade Arm Screw
Repeat x5
Light
Remote
x2
x15
x15
Troubleshooting
Advertisement
Table of Contents
