Remove The Edp Cable - Lenovo Slim 7 Carbon Hardware Maintenance Manual

Screw specifications
M2.0 x L2.3
Step 2. Remove six screws then remove the hinges and LCD cover frame.
Figure 28. Remove the hinges and LCD cover frame
Screw specifications
M1.6 x L2.2
Go to
https://support.lenovo.com/partslookup
replacement parts:
Hinges
LCD cover frame

Remove the EDP cable

Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD unit" on page 40
"Remove the hinge cover" on page 43
"Remove the bezel cover" on page 43
"Remove the LCD panel" on page 44
Step 1. Peel off the LCD connector fabric.
Note: The LCD connector fabric is not reusable. Replace it when replacing related FRU.
46
Hardware Maintenance Manual
Number of screws
6
Number of screws
6
to look up the Lenovo part numbers of the following