Remove The Lcd Panel; Remove The Antennas - Lenovo Slim 7 Carbon Hardware Maintenance Manual

Remove the LCD panel

Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD unit" on page 40
"Remove the hinge cover" on page 43
"Remove the bezel cover" on page 43
Step 1. Remove the two pieces of removable tape with tweezers then remove the LCD panel.
Note: The removable tape are not reusable. Replace them when replacing related FRUs.
Figure 25. Remove the two pieces of removable tape with tweezers then remove the LCD panel
Note: For LCD panel with the factory color calibration feature, do the following to install new color profiles:
1. Connect your computer to the network and close the X-Rite Color Assistant program.
2. Go to https://pcsupport.lenovo.com/us/en/downloads/DS543953
Double-click the EXE file and follow the on-screen instructions to finish the installation.
3. Go to C:\Program files (x86)\X-Rite Color Assistant and locate the
ProfileUpdaterForDisplayReplacement.exe file. Double-click the EXE file. Follow the on-screen
instructions to input the display serial number and click Submit. You can find the display serial number
and instructions on a sticker fixed to the front of the new LCD part. When the new color profiles are
installed successfully, a prompted window will be displayed.
Go to
https://support.lenovo.com/partslookup
replacement parts:
LCD panel
Removable tape

Remove the antennas

Make sure the following FRU (CRU) has been removed.
"Remove the LCD unit" on page 40
"Remove the hinge cover" on page 43
"Remove the bezel cover" on page 43
44
Hardware Maintenance Manual
to download the installation software.
to look up the Lenovo part numbers of the following