Advertisement
TROUBLESHOOTING
To place the water tank in place properly.
There is no excess water in the drip tray. Please
Water leaks from the bottom
empty the drip tray.
of the coffee maker.
The sealing ring is in good condition.
There is water in the tank.
No brewing.
The filter is not clogged because the mixture is too
fine or the coffee is too pressed.
There is water in the tank.
The pump has been activated.
The pump is too noisy.
There is enough coffee ground.
The filter holder has been inserted correctly.
Excessive loss of water
The seal is not dirty.
fromthe filter holder.
There are no coffee residues on the edge of the
filter holder.
The coffee has not been ground too coarsely.
The coffee has been pressed with the tamper.
The espresso is not
creamy enough.
The coffee is not too old or dry.
The traditional filter has been used with the frothin
jet device.
The machine has been heated.
The coffee has not been ground too coarsely.
The coffee has been brewed in cold cups. lt is
The coffee is too cold.
recommended to always brew coffee in warm cups.
The filter holder has not been preheated (Only for the
1st coffee).
The steam nozzle is not clogged. Clean the nozzle,
remove the milk scale (milk stone).
The milk does not
The steam nozzle has not been inserted too deep
froth enough.
in the jug.
The milk is not too hot.
13
Advertisement
