Protection From Electric Shock - Avtech AVPP-2A-B Instructions Manual

Destination Region
United Kingdom, Hong Kong,
Singapore, Malaysia
Australia, New Zealand
Continental Europe, Korea,
Indonesia, Russia
North America, Taiwan
Switzerland
South Africa, India
Japan
Israel
China

PROTECTION FROM ELECTRIC SHOCK

Operators of this instrument must be protected from electric shock at all times. The
owner must ensure that operators are prevented access and/or are insulated from
every connection point. In some cases, connections must be exposed to potential
human contact. Operators must be trained to protect themselves from the risk of electric
shock. This instrument is intended for use by qualified personnel who recognize shock
hazards and are familiar with safety precautions required to avoid possibly injury. In
particular, operators should:
1. Keep exposed high-voltage wiring to an absolute minimum.
2. Wherever possible, use shielded connectors and cabling.
3. Connect and disconnect loads and cables only when the instrument is turned off.
4. Keep in mind that all cables, connectors, oscilloscope probes, and loads must
have an appropriate voltage rating.
5. Do not attempt any repairs on the instrument, beyond the fuse replacement
procedures described in this manual. Contact Avtech technical support (see
page 2 for contact information) if the instrument requires servicing. Service is to
be performed solely by qualified service personnel.
Description
BS 1363,
230V, 50 Hz
AS 3112:2000,
230-240V, 50 Hz
European CEE 7/7
"Schuko" 230V, 50 Hz
NEMA 5-15,
120V, 60 Hz
SEV 1011,
230V, 50 Hz
SABS 164-1,
220-250V, 50 Hz
JIS 8303,
100V, 50-60 Hz
SI 32,
220V, 50 Hz
GB 1002-1 / 2099-1,
220V, 50 Hz
Option Manufacturer
-AC00 Qualtek
-AC01 Qualtek
-AC02 Qualtek
-AC03 Qualtek
-AC06 Qualtek
-AC17 Volex
-AC18 Qualtek
-AC19 Qualtek
-AC22 Qualtek
11
Part Number
370001-E01
374003-A01
364002-D01
312007-01
378001-E01
2131H 10 C3
397002-01
398001-01
399012-01