For The Installer; Specifications - Scotsman ND650 Service Manual

ND650
FOR THE INSTALLER: Specifications
This ice maker-dispenser is designed to be
mounted on a machine stand, or a countertop, or
using wall mounting kit KWB3, hung from a wall.
The sink may be retained, or removed and the
optional longer splash panel (KSP1) installed in
place of the original. Instructions for each kit are
included in this service manual.
20.5"
NAMEPLATE
on inside of
right side panel
21.5"

SPECIFICATIONS

Model Number Dimensions
(w/o stand)
H" x W" x D"
ND650AE-1A 48.88 x 26 x 21.5
ND650WE-1A
ND650AS-1A
ND650WS-1A
+ Minimum Circuit Ampacity is used to determine wire size and type per National Electric Code.
14.06"
19.19"
Optional for water and
drain lines
Ice
Type
NUGGET
same same
same same
same same
Before beginning the installation, check that all the
materials and kits required are available at the
installation location.
3.54"
4.5"
1.88" dia
12.25"
2.56"
3/8" FPT
Condenser
Water Inlet
(Water Cooled)
1.88"dia
1/2" FPT
Cond. Drain
(Water Cooled)
3/4" FPT
Drain
Condenser Cabinet
Type Finish
Air Painted
Water Painted
Air Stainless
Water Stainless
March, 1989
Page 2
ELECTRCIAL JUNCTION BOX
3/8" Flare
Potable Water Inlet
12.27"
3.12"
1.12"
Basic Minimum
Electrical Circuit
Ampacity+
115/60/1 17.2
115/60/1 16.2
115/60/1 17.2
115/60/1 16.2
5.12"
6.43"
Maximum
Fuse
Size
20
20
20
20