Maintenance; Glider Inspection; Overstress; Paraglider Repairs - Advance acoustic OMEGA ULS 21 Product Manual

Table of Contents

Advertisement

Do not leave the glider out in the sun unnecessarily before and after flight ( UV light ).
Do not subject the packed glider to excessive temperature fluctuations, and do ensure adequate air
circulation to prevent condensation forming.
When landing, make sure that the canopy does not fall on its leading edge.

7. MAINTENANCE

7.1. Glider inspection

Your OMEGA ULS must be checked every 24 months, 100 flying hours or 100 flights, whichever comes first. The
check should be carried out by an authorised ­ADVANCE check centre, according to the recommended guidelines. 
When carrying out a periodic glider inspection, the condition of all materials is assessed with the utmost care
according to strict guidelines. At the end of the inspection, the overall condition of the paraglider is rated and
recorded in a test report. If these guidelines are not observed, the extended ADVANCE warranty becomes null and
void.

7.2. Overstress

When using the product there is always the risk of unpredictable overstress in flight, for example caused by flying
conditions or a surprise bump in the air. In rare cases the product could suffer damage. This is especially
disappointing in that, usually, neither the manufacturer nor the pilot can be held responsible. Light products tend to
be more susceptible to damage due to overstress.
In the event of damage, please contact your dealer and they will contact us. We strive to
Info
be accommodating in such cases and work together to find the best possible solution. This
is individual and depends on the assessment of each case.

7.3. Paraglider repairs

15 / 21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omega uls 22Omega uls 23Omega uls 24

Table of Contents