Installation
A crossover cable must be used to establish direct Ethernet connection. A 1:1 cable must be
used to establish connection over active components (switch/hub).
We recommend using a stranded wire with a 1.5 mm² wire cross-section to connect the sup-
ply line.
Fig. 5-3: Electrical connection · TROVIS 6616-1
Fig. 5-4: Electrical connection · TROVIS 6616-2
5-4
–
USB
24 V DC
Micro USB
USB
LAN
+
LAN
+
–
24 V DC
EB 6616-1/-2 EN