Water Glass Kit - Continued - Scotsman ID150 Service Manual

ID150, ID200, ID250

WATER GLASS KIT - CONTINUED

ID150
A 4"
B 2.5"
ID200, ID250
A 6 1/8"
B 3 1/8"
Water inlet can be routed either from
the back or from underneath the
dispenser.
If from the back, remove the back and
bottom access panels.
If from below, only remove the bottom
access panel.
A hole is not needed at the
intersection of C and D, unless the
back access panel is retained.
May 2002
Page 6