Potable Water Supply - Scotsman MV 426 How To Use Manual

GB
WARNING!!!
GENERAL SPECIFICATIONS
OUR PRODUCTS ARE GOVERNED BY EC LOW TENSION
DIRECTIVE 2006/95/CE - EMC - 2004/108/CE
This appliance is not intended for use by persons -including chil-
dren- with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been fiven
superfision or instruction concerning use of the appliance by a
person responsible for their safeti. Children should be supervi-
sed to ensure that they do not play with appliance.
The icemaker must be connected to a

POTABLE WATER SUPPLY

6
ATTENTION:
ATTENTION:
a) the room temperature must not fall below 10°c (50° F) or
above (100° F).
b) the water conductivity value must be not below than 10
µs/cm.
c) The machine does not take demineralised water.
d) the main water temperature must not fall below 5°C (40° F) or
above 35°C (95° F).
e) the main water pressure must not fall below 1 bar (14 PSI) or
above 5 bar (70 PSI). If pressure is above 5 bar a presasure
regulator should be fitted on the water supply machine (pict.
nr. 11).
f) machine is awais from souces of heat and in a sufficiently ven-
tilated area. A distance of a least 20 cm must be foreseen
between the sides/the bach of the machines and the walls (pict.
nr. 12 - nr. 14).
The maximum voltage variation should not exceed ± 6% of that
stated on the rating plate. Provide for a feeding circuit to the
machine, with its own bipolar main switch at least 3 mm. of
contacts opening.
The machine should be connected to an independent fuse or
suitable power supply with earth terminal. The whole system must
be calibrated according to the power machine indicated on the
registration label.