PACKAGE CONTENTS
A –Lamp Body x 1
Assembly and Installation
1
Charging the lantern
CAUTION: Please do not place near fire (e.g. lighted candle).
To charge the lantern, plug the USB-C end of the USB charging cable
□
(E) into the USB-C access (D). Plug the other USB end of the USB
charging cable (E) into a USB power source. It takes about 4 hours to
fully charge the battery.
The LED lantern will remain illuminated for about 20 hours if you don't
□
use the speaker.
The LED lantern will remain illuminated for about 4 hours if you use the
□
speaker.
After about 4 hours of use, the LED light and speaker will turn off. To
□
continue using only the LED light, press the power button (C) for about
1 second to illuminate the LED light again. Without any additional
charging, the LED light will remain illuminated for about 8 hours
If the LED light is turned OFF and not providing any illumination, the
□
speaker will play music for about 5 hours.
B –Indicator Light x 1
C –Power Button x 1
OUTDOOR LED LANTERN SPEAKER
D –USB-C access x 1
2
Illuminating the lantern
To illuminate the lantern, press the power button (C) for about
□
1 second.
To control the brightness, press the power button (C). It has
□
three brightness adjustments.
To turn the lantern OFF, press the power button (C) again for
□
about 1 second.
1
Item # 1000 000 000
Model # JWX2811LS
Use and Care Guide
E –USB Charging Cable x 1
Need help?
Do you have a question about the JWX2811LS and is the answer not in the manual?
Questions and answers