KTM F8103S4 Owner's Manual page 98

13 BRAKE SYSTEM
96
Info
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines are not
designed for DOT 5 brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint.
Only use clean brake fluid from a sealed container.
E01017-10
E01018-10
E01019-01
E01018-10
–
Stand the vehicle upright.
–
1
Remove screws .
–
Take off the cover with the washer and membrane
–
Press the brake piston back into the basic position and ensure
that brake fluid does not flow out of the brake fluid reservoir;
extract some if necessary.
–
3
Remove cotter pin .
–
4
Remove pin .
–
5
Take off retainer spring
–
Clean the brake caliper.
–
Position new brake linings.
Info
Always change the brake linings in pairs.
–
Position retaining spring
–
4
Mount pin .
Info
To make it easier to mount the pin, push the retainer
spring down.
Make sure the retaining spring is seated correctly.
–
3
Mount cotter pins .
–
Operate the foot brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
point.
2
and remove the brake linings.
5
.
.