Table of Contents
Advertisement
CMS1002W
SPECIFICATIONS
Always refer to the nameplate, located on the back
of the cabinet, for the:
model number,
serial number,
basic electrical
requirements,
minimum circuit ampacity,
maximum fuse size,
and refrigerant charge.
A serial number plate with the model number,
serial number and refrigerant charge is located
behind the front panel, near the control box.
The unit comes from the factory with the correct
refrigerant charge. The refrigerant charge
information is for recharging, should that be
necessary.
All utility connections are made at the back of the
ice maker.
Before beginning installation, be sure that all of the
components necessary for complete assembly of
the ice system are available, and are the correct
components with regard to model, voltage, and
finish.
A stacking kit (KSCMS) is required for stacking
CMS1002 ice machines. It interconnects the sonar
bin ice level controls. CMS1002 may only be
stacked onto another CMS1002.
The CMS1002 will fit any 30" wide Scotsman bin
without needing a bin top. Other bins will require a
bin top.
Model Number
CMS1002WE-32A
CMS1002WE-3A
* The system charge is in the machine. This number is for recharging purposes only. If the nameplate has a
different value, go by the nameplate.
Minimum
Maximum
Dimensions
W"
Basic Electrical
x D" x H"
30 x 24 x 27
208-230/60/1
30 x 24 x 27
208-230/60/3
Air Temperature
0
50
F.
0
100
F.
September, 1993
Refrigerant Type
R-22
R-22
Water Temperature
0
40
F.
0
100
F.
Page 2
Refrigerant Charge*
55 ounces
55 ounces
Voltage
-5%
+10%
Advertisement
Table of Contents
